一、firewall介绍
CentOS 7中防火墙是一个非常的强大的功能，在CentOS 6.5中在iptables防火墙中进行了升级了。 1、官方介绍 The dynamic firewall daemon firewalld provides a dynamically managed firewall with support for network “zones” to assign a level of trust to a network and its associated connections and interfaces. It has support for IPv4 and IPv6 firewall settings. It supports Ethernet bridges and has a separation of runtime and permanent configuration options. It also has an interface for services or applications to add firewall rules directly. 2、什么是区域Zone： 网络区域定义了网络连接的可信等级。这是一个 一对多的关系，这意味着一次连接可以仅仅是一个区域的一部分，而一个区域可以用于很多连接。 3、哪个区域可用? 由firewalld 提供的区域按照从不信任到信任的顺序排序。 4、区域的分类? Firewalls can be used to separate networks into different zones based on the level of trust the user has decided to place on the devices and traffic within that network. NetworkManager informs firewalld to which zone an interface belongs. An interface’s assigned zone can be changed by NetworkManager or via the firewall-config tool which can open the relevant NetworkManager window for you. The zone settings in /etc/firewalld/ are a range of preset settings which can be quickly applied to a network interface. They are listed here with a brief explanation: drop
Any incoming network packets are dropped, there is no reply. Only outgoing network connections are possible. block
Any incoming network connections are rejected with an icmp-host-prohibited message for IPv4 and icmp6-adm-prohibited for IPv6. Only network connections initiated from within the system are possible. public
For use in public areas. You do not trust the other computers on the network to not harm your computer. Only selected incoming connections are accepted. external
For use on external networks with masquerading enabled especially for routers. You do not trust the other computers on the network to not harm your computer. Only selected incoming connections are accepted. dmz
For computers in your demilitarized zone that are publicly-accessible with limited access to your internal network. Only selected incoming connections are accepted. work
For use in work areas. You mostly trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted. home
For use in home areas. You mostly trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted. internal
For use on internal networks. You mostly trust the other computers on the networks to not harm your computer. Only selected incoming connections are accepted. trusted
All network connections are accepted.
It is possible to designate one of these zones to be the default zone. When interface connections are added to NetworkManager, they are assigned to the default zone. On installation, the default zone in firewalld is set to be the public zone. 注：具体内容，请参见官方文档介绍！ 二、firewall配置
The configuration for firewalld is stored in various XML files in /usr/lib/firewalld/ and /etc/firewalld/. This allows a great deal of flexibility as the files can be edited, written to, backed up, used as templates for other installations and so on. 注意：以下firewalld 的操作只有重启之后才有效：service firewalld restart 重启 1、系统配置目录 /usr/lib/firewalld/services
目录中存放定义好的网络服务和端口参数，系统参数，不能修改。
2、用户配置目录 /etc/firewalld/
3、如何自定义添加端口 用户可以通过修改配置文件的方式添加端口，也可以通过命令的方式添加端口，注意，修改的内容会在/etc/firewalld/ 目录下的配置文件中还体现。 firwall-cmd --permanent --add-port=9527/tcp
参数介绍： - 1、firwall-cmd：是Linux提供的操作firewall的一个工具；
- 2、--permanent：表示设置为持久；
- 3、--add-port：标识添加的端口；
| 
京ICP备16037542号 )
发表于 2024-1-7 18:12:27